| PART |
Description |
Maker |
| 28333-PCN-001-A |
Mold Compound and Die Attach Change for ETQFP Package
|
M/A-COM Technology Solutions, Inc.
|
| FA1L3Z FA1L3Z-L FA1L3Z-T1B FA1L3Z-T2B |
Compound transistor
MEDIUM SPEED SWITCHING RESISTOR BUILT-IN TYPE NPN TRANSISTOR MINI MOLD
|
NEC
|
| FN1L3Z FN1L3Z-L FN1L3Z-T1B FN1L3Z-T2B |
Compound transistor
MEDIUM SPEED SWITCHING RESISTOR BUILT-IN TYPE PNP TRANSISTOR MINI MOLD
|
NEC
|
| FA1L3N FA1L3N-T1B FA1L3N-T2B FA1L3N-L |
Compound transistor
MEDIUM SPEED SWITCHING RESISTOR BUILT-IN TYPE NPN TRANSISTOR MINI MOLD
|
NEC
|
| FA1A4M FA1A4M-T2B FA1A4M-L FA1A4M-T1B |
Compound transistor
MEDIUM SPEED SWITCHING RESISTOR BUILT-IN TYPE NPN TRANSISTOR MINI MOLD
|
NEC
|
| FN1A4Z FN1A4Z-L FN1A4Z-T2B FN1A4ZM69 |
100 mA, 50 V, PNP, Si, SMALL SIGNAL TRANSISTOR MINIMOLD, SC-59, 3 PIN
MEDIUM SPEED SWITCHING RESISTOR BUILT-IN TYPE PNP TRANSISTOR MINI MOLD
Compound transistor
|
Honeywell International, Inc.
NEC
|
| 408-8737 |
The die assembly consists of an indenter die and nest die. Each die is held in the tool by a single screw
|
Tyco Electronics
|
| ISP1123 ISP1123D |
Universal Serial Bus compound hub
USB compound hub
|
Philips
|
| 907-0010 912-0120 914-0040 914-0070 914-0140 912-0 |
PUNCH&DIE SET 3-12MM
PUNCH&DIE 10.0MM CIRCULAR
PUNCH&DIE 16.5MM CIRCULAR
PUNCH&DIE 25.0MM CIRCULAR
PUNCH&DIE 12.0MM CIRCULAR
PUNCH&DIE 9.0MM CIRCULAR
PUNCH&DIE 20.0MM CIRCULAR
PUNCH&DIE 12.5MM CIRCULAR
STRIPPER 37.0 X 13.7 D CON
STRIPPER 31.75MM DIAMETER 低产31.75MM直径
LOUVRE TOOL 卢浮宫工
PUNCH&DIE 10.0MM CIRCULAR
STRIPPER 67.2 X 16.5 D CON
|
Peregrine Semiconductor, Corp.
Molex, Inc.
|
| STEVAL-ISB018V1 |
Evaluation board for STCC5021 USB charging controller with attach detection
|
ST Microelectronics
|
| BN1L4Z BN1L4Z-T BN1L4Z-T/JM |
COMPOUND TRANSISTOR
|
NEC[NEC]
|
